The gas safety check: every 12 months, no exceptions.
If there’s gas in a house you let, every gas appliance and flue you provide needs a safety check by a Gas Safe registered engineer each year. The record that comes back, often called the CP12 or gas safety certificate, has deadlines of its own. Here’s all of it.
The short answer
- How often
- Every 12 months. You can have it done up to two months early and keep the same deadline.
- Who
- A Gas Safe registered engineer, for every gas appliance and flue you provide.
- Copies
- To your tenants within 28 days of the check, and to new tenants before they move in. Keep it for two years.
- If you don’t
- It’s a criminal offence. HSE can prosecute, and that can mean a large fine, prison, or both.
When yours is due
Every gas appliance and flue you provide needs checking every 12 months. You can have the check done up to two months early and keep the original date, so the cycle doesn’t creep forward each year.
Work out your next one
Enter the date of your last check.
A new appliance or flue needs its first check within 12 months of being fitted.
What gets checked
Your duty
- Every gas appliance you provide: boiler, fire, cooker, hob
- Every flue and chimney they use
- The pipework and installation, including what a tenant’s own appliance connects to
- Appliances serving more than one home, such as a shared boiler
Not yours to check
- Gas appliances the tenant owns (theirs to look after)
- Appliances used only for business, not the home
- Homes on a lifelong lease of more than seven years
The check must be done by a Gas Safe registered engineer. You can look up an engineer’s registration on the Gas Safe Register before they start.
The record and who gets it
After the check the engineer gives you the gas safety record (often called the CP12): each appliance and flue checked, where it is, any faults and what was done, the engineer’s name, Gas Safe number and signature, the date, the address and your details.
| Who | When |
|---|---|
| Your tenants | Within 28 days of the check |
| A new tenant | Before they move in |
| Short lets under 28 days | A copy on display in the home |
| You | Keep each record for at least two years |
If you had a check done early to keep your date, keep the record until two more checks have been done, so you can show the dates were met.
Problems and access
- A fault is foundYou still get the record, with the fault on it. Put it right and have the follow-up added to the record.
- An appliance is switched offIt’s unsafe and mustn’t be used until it’s fixed. If it was the heating, give your tenant emergency heating.
- The tenant won’t let you inTake every reasonable step: try again, leave a notice, write explaining it’s a legal check, and keep a record of it all. Never force entry.
Carbon monoxide alarms
In England, since 1 October 2022, you must fit a carbon monoxide alarm in every room used as living accommodation that has a fixed combustion appliance, such as a gas boiler or gas fire. Gas cookers are the exception. Repair or replace an alarm once you’re told it isn’t working.
With a letting agent
Put it in the contract. HSE says your management contract should make clear who arranges the gas checks and the maintenance. Most agents book the engineer and send the record to the tenant, but if the check is missed, the landlord answers for it.
Ask your agent for every house’s latest gas safety record, and when each one runs out.
Every gas check, counted down.
Streets reads the gas safety records your agents and engineers email you and keeps each house’s expiry date. It turns amber 30 days before a check runs out and red under 7 days, or when there’s no record on file, on the house, the street and your Compliance page, so there’s time to book it inside the two-month window. Every record stays with its house.
Questions
How often does a rented house need a gas safety check?
Every 12 months. A new appliance or flue needs its first check within 12 months of being fitted, then every year after that.
Can I have the check done early?
Yes. Since 2018 you can have it done up to two months before it’s due and keep the original date, as if it had been done exactly 12 months after the last one. You need to keep the records that show this.
Is a CP12 the same as a gas safety certificate?
Yes. CP12 is the old name for the landlord gas safety record. It’s the record the engineer gives you after the yearly check.
Do I check the tenant’s own gas cooker?
No, the tenant is responsible for an appliance they own. You still look after the pipework and installation it connects to, and HSE recommends including every flue in the check.
What if the check finds a problem?
The engineer still gives you the record, listing what they found. You have to put it right. If they switch an appliance off as unsafe, it mustn’t be used, and if it was the heating you need to give the tenant emergency heating.
What if my tenant won’t let the engineer in?
You must show you took all reasonable steps: repeated attempts, a notice left at the house and a letter explaining it’s a legal check, with a record of every contact. You mustn’t force your way in.
Can I give a new tenant the last record?
Yes, a record is valid for 12 months, so a new tenant can have the existing one if their tenancy starts within that time. They must have it before they move in.
Do I need carbon monoxide alarms?
In England, yes: a carbon monoxide alarm in any room used as living accommodation with a fixed combustion appliance, such as a gas boiler or fire. Gas cookers don’t count.
Is my letting agent responsible?
Your management contract should say who arranges the checks and maintenance. If it’s left unclear, the duty stays with you as the landlord.
More guides for landlords
Sources
- Gas safety: landlords and letting agents HSE
- Gas safety check records HSE
- What needs a gas safety check HSE
- Gas safety checks: what if… HSE
- Dealing with tenants HSE
Checked on 27 October 2026. The rules can change: check HSE before you rely on a date. This guide is general information, not legal advice.